Close filters
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 3
No results were found for the filter!
Redundant Master Controller MPC 113
Mobile Process Controller MPC-113
Controller connector: JXT 36pole Interface: 2 CAN (ISO11898-24V, 50 - 1000 Bit/sek) Programmable inputs Digital-analog inputs: 2x6 Digital outputs: 2x6 PWM - 2A, current controlled outputs 2x2 digital outputs - 5A
START INQUIRY NOW
MPC 330 mobile process controller
Mobile Process Controllers - MPC-330
Programmed in CODESYS or C (on request) CAN interfaces 70 Pin (Tyco 963484) attachment plug Developed to be used under rugged conditions Potting components to protect against vibration and environmental influences
START INQUIRY NOW
mobile process controller 2D & 3D
Controller, MPC-"3D-Pro"
Integrated 2D and 3D controller in a single housing (optional) Processes all measured values transmitted by the sensors Compares target and actual values and regulates the hydraulics accordingly
START INQUIRY NOW
Signal Conditioner SC102
Signal Conditioner SC-102 metal
Operating voltage / Lithium Ion Battery: 3.7 V DC Loadcell voltage range Usig: 5 V DC Number of Load Cells: 2 Signal input: 0-2.5 V Measurement rate: 100 Hz / 2 Channels Indicator: LED Interfaces: 1x CANopen with Bluetooth Modul, 2.0...
START INQUIRY NOW
Juction Box Load Cells
Junction Box LTS
Housing material: Aluminium Load Cell Connections: 7x 5 pin female connector Weight: approx. 500 g Ingress Protection: IP67
START INQUIRY NOW
Junction Box 5P LTS
Junction Box 5P LTS
Housing material: Aluminium Load Cell Connections: 5x 5 pin female connector Weight: approx. 500 g Ingress Protection: IP67
START INQUIRY NOW
Signal Conditioner SC-102
Signal Conditioner SC-102
Operating voltage / Lithium Ion Battery: 3.7 V DC Loadcell voltage range Usig: 5 V DC Number of Load Cells: 2 Signal input: 0-2.5 V Measurement rate: 100 Hz / 2 Channels Indicator: LED Interfaces: 1x CANopen with Bluetooth Modul, 2.0...
START INQUIRY NOW
CAN I/O Box
CAN I/O Module Box
Current consumption: max. 300 mA Interfaces: CAN, CANopen DS 401, Interface Device Profile for Generic I -O, default Baudrate 250 KBaud Inputs: 8 digital inputs pnp/npn Outputs: 8 digital outputs 2.6 A per output Processor: 64 + 16 KByte...
START INQUIRY NOW
Mobile Signal Controller MSC-113
Mobile Signal Controller MSC-113
Inputs / Outputs: 2 x 4 (8) of Inputs: digital high side or analogue 0-25 mA, 0-32 Vdc 2 x 2 (4) of Inputs: digital high side or analogue 0-25 mA, 0-5.5 Vdc, 0-32 Vdc with pull up to read a PTC sensor 2 x 4 (8) of Digital/PWM high side...
START INQUIRY NOW
Controller GS-506
Controller GS-506, CAN-Valves
Outputs: 4x ON/OFF or PWM (1 kHz), NPN or PNP, max. 3 A, or 4x Danfoss Interfaces: 3x CAN ISO 11898 – 24 V 125 kBits/sec Connectors: 1x 7 pin male screwed connection, 1x 7 pin female bayonet connection, 1x 10 pin female screwed...
START INQUIRY NOW
Power Connecting Box GS-506
Power Connection Box
Connectors: 20 x 6,3 mm flat blade connector Current consumption (rated value): 80 mA Ingress Protection: IP65
START INQUIRY NOW
Controller MLC-580
Controller MLC-508
Outputs: 7x current controlled valve outputs, max. 3 A, Interfaces: 3x CAN ISO 11898 – 24 V 125 kBits/sec Connectors: 2x 7 pin male screwed connection, 1x 19 pin screwed connection, 1x 10 pin female screwed connection Ingress Protection:...
START INQUIRY NOW
1 From 3
Viewed