Products from MOBA Mobile Automation AG

MOBA Mobile Automation AG

There is no better solution for the harsh everyday work of the construction industry. The specially developed technologies of MOBA convince under the roughest conditions - whether in wind, water, dust or vibration. They are not only tough, but above all: innovative.

Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
 
1 From 2
No results were found for the filter!
MOBA Fleece jacket
MOBA Fleece jacket
Fleece jacket in different sizes with MOBA logo
From €24.82 *
MOBA softshell jacket
MOBA softshell jacket
Softshelll jacket with MOBA-Logo in different sizes
€39.64 *
MOBA Poloshirt
MOBA Poloshirt
Poloshirt with MOBA logo in different sizes
€14.33 *
MOBA Notepads
MOBA Notepads
Notepads in MOBA design in DIN A4 and A5
From €2.90 *
MOBA USB Stick
MOBA USB Stick
USB sticks with noble laser engraving
Content 1 Piece(s)
From €17.39 *
MOBA Safety Vest
MOBA Safety Vest
Safety vest with MOBA-Logo
€5.79 *
MOBA Cap
MOBA Cap
Cap with logo embroidery
€9.27 *
MOBA Lanyard
MOBA Lanyard
High-quality Lanyard in MOBA-Design
€8.70 *
MOBA Pen
MOBA Pen
Premium prodir ballpoint pen with MOBA logo
€3.47 *
MOBA Rain jacket
MOBA Rain jacket
Rain jacket with MOBA logo in different sizes
€25.94 *
MOBA Cappuccino-Cup Set
MOBA Cappuccino-Cup Set
6-piece Mahlwerck Set in MOBA-Design
€17.39 *
MOBA Bluetooth Speaker
MOBA Bluetooth Speaker
Outdoor Bluethooth Speaker in MOBA design
Content 1 Piece(s)
€46.40 *
MOBA medical tape box
MOBA medical tape box
medical tape box with 5 tapes
€1.16 *
MOBA Coffee Cup
MOBA Coffee Cup
Black softtouch ceramic cup in MOBA design
€8.11 *
MOBA Yardstick
MOBA Yardstick
Yardstick with MOBA-Logo
€5.79 *
MOBA Powerbank
MOBA Powerbank
robust powerbank in MOBA design, perfect for outdoor activities
€23.19 *
G-Slope LSTA Sensor
G-Slope LSTA Sensor, CAN, MGS-0150
Specially developed for use on a highly vibrating screed, the G-Slope sensor filters out interfering variables thanks to intelligent algorithms.
Pave Project Manager
Pave Project Manager
Pave Project Manager is the most sophisticated analysis and reporting tool for PAVE-IR data. It provides detailed information on thermal profiles, single spot temperature sensors, speed, paver stops, quality factor diagrams and much more...
€0.00 *
GNSS Compass
GNSS Compass
The GNSS compass provides important data, which is both essential for the orientation of the upper structure and the basis for adjusting the target slope. It completes the 2D system and optimizes it for working on sloped surfaces.
Magnet holder Kit Weather station IR sensor
Magnet holder Kit
Magnet holder Kit for for Brackets, IR Temperature sensor and Weather Station. It consists of magnet, Screw, nut M8 and washer.
Stay-Tube Weather Station
Stay-Tube
Stay-Tube for Weather Station with cable feedthrough
MPC 330 mobile process controller
Mobile Process Controllers - MPC-330
MOBA Mobile Process Controllers (MPC) are designed and manufactured for use on heavy duty machines like mobile cranes and lifters. MOBA MPCs distinguish themselves through their outstanding quality and are suitable for application in...
Redundant Master Controller MPC 113
Mobile Process Controller MPC-113
robust high-end Redundant Master Controller MPC 113 for mobile cranes and working platform applications.
Multiple Ultrasonic Sensor Sonic-Ski Plus PWM CAN
Multiple Ultrasonic Sensor Sonic-Ski Plus CAN/PWM
The multiple ultra sonic sensor Sonic-Ski plus sensor is the first such device equipped with multiple ultrasonic oscillators. Five sensors determine the distance to the reference point, while a sixth is used for temperature compensation...
MOBA Modular Control Panel MCP
MOBA Modular Control Panel MCP
The MCP “Modular Control Panel” was created according to one of our first customer needs. This one of is taking the advantages of the HMI concept. MOBA designed the controller housing multifunctional, making it suitable for four...
mobile process controller 2D & 3D
Controller, MPC-"3D-Pro"
Integrated 2D & 3D controller in one single housing. It processes all measured values transmitted by the sensors.
MOBA 3D-matic operating panel
Operating panel 3D-matic
Visualisation of the 3D workflow and all important information. Transfer of saved data via USB interface 7 inch transflective colour display with Intuitive operation
Star DP8340 Printer
Printer Star DP8340
Voltage Range:12 V(DC) Interface: RS232 Housing Material: PVC Print Method: 7 pin shuttle impact dot matrix Paper Roll Dimensions: 115 mm Paper Thickness: 0.07 to 0.09 mm
Signal Conditioner SC102
Signal Conditioner SC-102 metal
Operating voltage / Lithium Ion Battery: 3.7 V DC Loadcell voltage range Usig: 5 V DC Number of Load Cells: 2 Signal input: 0-2.5 V Measurement rate: 100 Hz / 2 Channels Indicator: LED Interfaces: 1x CANopen with Bluetooth Modul, 2.0...
Multiplex Big Sonic Ski Asphalt Pavers
Big Sonic Ski - Supplement Kit - replaces...
The Bigski achieves maximum planarity during asphalt paving, making it unrivaled in its precision. With three sensors, long unevenness that occur in regular intervals of five to seven meters, can be detected. This increases the...
€19,209.60 *
Big Sonic-Ski 13m mechanical Kit
Big Sonic-Ski - Modular Kit 13m - replaces...
Mechanic assembly for 3 grade sensors, with dismountable swing arm but without tow arm bracket.
€5,851.04 *
Ultrasonic Sensor MOBA-Sonic Vögele
MOBA Sonic III replaces Vögele 2013496, 2013495...
Contact free ultrasonic measurement for optimal fleet management from asphalt in paver screed.
From €991.80 *
MOBA-Sonic IV
Material Control Sensor MOBA-Sonic IV
To achieve a constant asphalt layer thickness, the ultrasonic sensor is the optimum solution for regulating the quantity of material in front of the screed.
Power Switch Cable Xsite PRO
Power-switch Cable for MCC15
This Power Cable is needed when power to GNSS receiver is taken via the "CB2" Box.
Power Cable XD2
Power Cable for LED Display "XD2"
Cable length: 5 Meter
Straight Connecting Cable 1m
Cables, Straight CAN connection 1m
Cable with straight connectors at both ends. Connectors: 7-pin Bay. - 7-pol Bay.
Standard Cable CAN Connection
Standard Cables, CAN Connection
Connectors: 7pol Bay. 90° to 7pin Bay.
USB Cable
USB Data Cable
Connectors: USB A to USB mini B
GNSS Antenna Cable 10m
GNSS Antenna Cable
Cable length: 10 Meter Connectors: TNC male - TNC male
Antenna Cable 10m
Radio Antenna Cable 10m
Cable length: 10m Connectors: TNC female - TNC male
Power Cable Xsite EASY
Power Cable "Xsite EASY"
Power Cable for Xsite EASY Operating Panel.
Power Cable Xsite PRO
Power Cable "Xsite PRO / Xsite PRO ADVANCED"
Power Cable for Xsite PRO / Xsite PRO ADVANCED Operating Panel.
Power Cable GS-506 Controller
Power Cable GS-506 Controller
Power cable for power supply of controller/system "GS-506". Cable length: 6 Meter Connectors: 7 pin screw connection to open end
Mast for GNSS antenna
Mast for GNSS Antenna
Extension length: 700 mm
CF Industrial Card, 2GB
CF Industrial Card, 2GB
CF industrial Card incl. image "MCC12 for "Xsite PRO/PRO ADVANCED" Data Space: 2GB
Adapter Box for Vögele Controllers
Adapterbox suitable for Vögele-Pavers
Adapterbox suitable for Vögele-Pavers directs 2 controllers to one central machine connector. Cable length: 3 Meter Converts NPN to PNP (for Vögele paver) Connectors: 2 x CA 10 pole male (left/right), 1 x Harting 10 pole male (machine)
€553.66 *
Y-Coil cable
Y-Coil Cable, R-30cm/6m Connection
Y-Coil cable, R-30 cm / 6 m connection between controller, machine and slope sensor Cable length: 6 Meter (stretched) / 0.3m incl. 1 x 120 Ohm CAN bus resistor Connectors: CA 10 pole male coupling (controller), CA 10 pole female...
Coil Cable, 3m connection sonic/machine, 6-pin to open end
Coil Cable, 3 m Connection Sonic/Machine, 6-pin...
6 pin Connection Coil cable to connect the Sensor Sonic-Ski with the Machine.
Coil Cable Connection Sensor Machine
Coil Cable, Connection Sonic/Machine, 5-pin
5 pin Connection Coil cable to connect the Sensor Sonic-Ski with the Machine.
Coil Cable Connection Sensor Machine 6pin
Coil Cable, Connection Sonic/Machine, 6-pin
Coil Cable to connect Sonic-Ski with the machine.
Coil Cable MOBA-matic Controller 6m
Coil Cable, 6m Connection Controller/Sensor
Cable length: 6m (stretched) Connectors: CA 7pole, male, CA 7pole, female
Cable M12, CAN
Cable M12, CAN
M12 Cable CAN Connectors: 5 pole M12, male, 5 pole M12, female
USB Cable 2m
USB Adapter Cable
USB Adapter Cable to connect "MOBA-Drive" to a "Windows Office" PC Connectors: USB-A, 4-pin female
Adapter cable
Adapter Cable, CA/M12
Adapter, CA Bayonet/M12 with 120 Ohm bus resistor Wire cross section: 5 x 0.34mm² Connectors: 5 pin M12, male, 7 pin bay, female
Connection Cable Control Box to Machine
Cable, 5 m Connection Control Box/Machine
Connector: 6 pin - Open end Cable length: 5 Meter
Power Cable for On Board Computer "MOBA Operand", 8m
Power Cable for On-board Computer "MOBA...
Power connection for On-board computer "MOBA Operand". Cable Length: 8 Meter Wire cross section: 4 x 0.75 mm² Connector: 7 pin "Fischer", female automobile power connector
Power Cable On-Board Computer
CAN Cable for On-board Computer "MOBA Operand",...
CAN connection cable for On-Board Computer "MOBA Operand"
Power Cable A Weather Station
Cable-set "Weather Station"
Cable set "Weather Station" Application: Pave-IR System Consisting of: 04-02-15353 Cable A, 0.5 Meter, 10 pin (weather station) / 7 pin "Binder", male 04-02-15352 Cable B, 5 Meters, 5 pin male, M12 / 7 pin "Binder", fem.
Cable Machine Bus
Cable "Machine Bus"
Cable "Machine Bus" for Vögele paver with WIFMS Cable length: 5 Meter
Connecting Cable Duo Level III
Connection Cables Duo Level III
Connection Cable to connect sensor with built-in indicator Connector: 7-pin, female, Open end
Connection Cables for Duo Level IV
Connection Cables for Duo Level IV
Connection Cable to connect sensor with built-in indicator (Duo Level IV) Connector: 7-pin, female, 7-pin, male
Coil Cable G-176 5-wires 3m
Coil Cable, Extension, 3 m Cable Extension
Connectors: CA 10 pin, female, CA 10 pin, male coupling
Coil Cable Controller Sensor
Coil Cable, Extension 6 m Connection...
Coil cable, exten. 6m connection from controller to sensor cable (CAN-interface)
Coil Cable
Coil Cable, Connection Junction/Sensor...
Coil cable, 6m connection from junction box to the sensor (CAN-interface) Cable length: 6 m (stretched) Connectors: CA 7-pin, bay. male, CA 7-pin, bay. female
Coil Cable MOBA-matic Controller
Coil Cable, 3m Connection Controller/Machine,...
For individual connection to machine Cable length: 3 Meter (stretched) Connectors: CA 12 pin bay. female (to conroller), Open end
Coil Power Cable Laser-matic
Coil Cable, 3m Connection Controller/Machine
Cable length: 3 Meter (stretched) Connectors: CA 12 pin bay. female (to conroller), CA 10 pole bay, female (to machine)
04-02-02561 Coil Cable 10m
Coil Cable, 3m Connection Controller/Machine...
Cable length: 3 Meter (stretched) Connectors: CA 12 pole bay. female (to conroller), CA 10 pole, female (to machine)
Coil Cable Terminal Resistors 6m
Coil Cable, 6 m Connection Controller/Sensor
Cable Type: CAN-interface incl. 2 x 120 Ohm CAN bus resistor Cable length: 6 Meter (stretched) Connectors: CA 7 pole bay. male, CA 7 pole bay. female
Coil Cable Extension 7m
Coil Cable, Extension 6m Connection...
Cable length: 6 Meter (stretched) Connectors: CA 7 pin, male, CA 7 pin, female coupling
Coil Cable Machine Controller
Coil Cable, 6m Connection Controller/Machine
Cable length: 6 Meter (stretched) Connectors: CA 7 pole, male, CA 7 pole 90°, female coupling
Coil Cable Controller G-176
Coil Cable, 6 m Connection Controller/Machine...
Cable length: 6 Meter, (stretched) Connectors: CA 7 pole 90° female open end
Coil Cable Controller G-176
Coil Cable, 6m Connection Controller/Machine...
Cable length: 6 Meter, (stretched) Connectors: CA 7 pin 90° female, CA 10 pin female
Coil Connecting Cable 3m
Coil Cable, 3 m Connection Controller/Machine...
Connectors: CA 7 pole 90° female, CA 10 pole female
04-02-20100 Ignition Cable
Ignition Cables
Ignition cable to connect a ignition electrode to Ignition Boxes IS-01 / IS-03.
Y-Cable Power Supply MCA-500
'Y-Cable, MCA-500', 3/1m
Connection for Power supply and CAN to operating panel "GDC-320". Cable length: 3 Meter (Power), 1 Meter (CAN) Connectors: 7 pin Binder, female (GDC-320), 5 pin Binder M12, female (CAN), Open end
Y-Cable_Junction IR-Spot
Y-Cable, CA-M12 Cable Junction
Cable length: 30 cm Connectors: 1 x CA 10 pole male couppling to 1 x CA 10 pole female, 1 x M12 5 pole female
Y-Cable Sonic-Ski 6m
Y-Coil Cable, 30cm/6m Connection Cable
Y-coil cable, 30 cm / 6 m connection between digital controller V3.26, machine and Sonic-Ski CAN and/or junction box. Cable length: 6 Meter (stretched) / 0,3 m incl. 2 x 120 Ohm CAN bus resistor Connectors: 10 pin male coupling...
Power Cable Y-Cable, M12
Power Cable Y-Cable, M12
Connectors: 8 pin female, 8 pin female, Open end
Y-Cable M12 Junction
Y-cable, M12
Cable junction Cable length: 30 cm Wire cross section: 5 x 0.34mm² Connectors: 1 x 5 pin M12, male, 2 x 5 pin M12, female
Cable M12, CAN, 5 m incl. 120 Ohm CAN-Bus-Resistor
Cable M12, CAN, 5 m incl. 120 Ohm CAN-Bus-Resistor
Cable length: 5 Meter Connectors: 5 pole M12, male, 5 pole M12, female
M12 Connection Cable
M12 Connection Cable
Connectors: 8 pole male / 8 pole female 90° Lenght: 7 Meter
Bus Termination Cable
Bus Termination Cable, M12 120 Ohm Resistor
Cable length: 30cm Wire cross section: 5 x 0,34mm² Connectors: 5-pin M12, male, 5-pin M12, female
Cable A Smart Antenna
Antenna Cable Set "SMART Antenna"
Cable set "Smart antenna" Application: Pave-IR System Consisting of: 04-02-15348 Cable A, 0.8 m, 14 pole(antenna) / 7 pole "Binder", male 04-02-15351 Cable B, 5 m, 5 pole male, M12 / 7 pole "Binder", fem.
Vögele Junction Box
Big-Ski Junction Box replaces Vögele 2037420
Junction Box compatible with Vögele-Pavers connects 3 grade sensors with CAN interface for avaraging. Connector: 8 pin Baj. male (analog), 3 x 7 pin Baj. female (CAN) CAN interface: CAN ISO 11898 - 24 V 125 kBit/sec Output: Analog 0 to 8...
€2,900.00 *
12m Connector Coil Cable
12 m Connector Coil Cable replaces Vögele...
12 Meter Connection Coil Cable from Junction Box/Sensor to leveling control unit Length: 12 Meter (streched) Connector: 8 pin Baj. female, 8 pin Baj. male
€339.88 *
6m CAN Connection coil cable
6m CAN Connector Coil Cable replaces Vögele...
6m CAN Connector Coil Cable replaces Vögele 2037423
€241.28 *
Transportation Case Big Ski Vögele
Big Sonic-Ski Case replaces Vögele 2271509
Transportation Case for Big Sonic-Ski Electronic Components.
€342.20 *
Coil Connector Cable 12m
12m CAN Connector Coil Cable replaces Vögele...
12m CAN Connector Coil Cable replaces Vögele 2037422 Length: 12 Meter (stretched) Connectors: 7 pin Baj. female (CAN), 7 pin Baj. male (CAN)
€312.04 *
Cross Slope Sensor MGS-0600
Cross Slope Sensor MGS-0600
X-axis, +/- 60° Gyro-Sensor Interface: CAN ISO 11898-24 V 125 kbit/s 40 Hz Connector: 7 pin bayonet type connection Weight: 1.3 kg Ingress Protection: IP67
Material Control MOBA-Sonic III
Material Control Sensor MOBA-Sonic III
To achieve a constant asphalt layer thickness, the ultrasonic sensor is the optimum solution for regulating the quantity of material in front of the screed.
Manual Mast TM-900
Manual Mast TM-900
Mast lock with clamping screw Shock absorbing mounting suspension Printed-on scale: 0 – 100 cm Extension length: 900 mm Resolution: 1 mm Material mast tube: Anodized aluminium Weight: 2,8 kg
Slope Sensor Duo Level IV
Slope Sensor X/Y-Axis, Duo-Level-Encoder IV
Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Printer MRP-580
Printer MRP-580
Current consumption: 2 A Interface: RS232 Connector: 8 pin male connector Weight with mount: 1.3 kg Ingress protection: IP65
Slope Sensor Duo Level III
Slope Sensor X/Y-Axis, Duo-Level-Encoder III ± 10°
Measuring range: ± 10° Output signal: 4-20 mA 600 Ohm Current consumption: Shock resistance: 15 g, 15 ms Connector: 5 pin male connector Weight: approx. 1 kg Ingress Protection: IP67
Slope Sensor Duo Level III
Slope Sensor X/Y-Axis, Duo-Level-Encoder III ± 5°
Measuring range: ± 5° Output signal: 2x 4 ...20 mA (max.600 Ohm) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Slope Sensor Duo Level II
Slope Sensor X-Axis, Duo-Level-Encoder II
Measuring range: ± 5° Output signal: 2 x 4-20 mA (Last max. 500 π) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: approx. 1.8 kg Ingress Protection: IP67
Juction Box Load Cells
Junction Box LTS
Housing material: Aluminium Load Cell Connections: 7x 5 pin female connector Weight: approx. 500 g Ingress Protection: IP67
Junction Box 5P LTS
Junction Box 5P LTS
Housing material: Aluminium Load Cell Connections: 5x 5 pin female connector Weight: approx. 500 g Ingress Protection: IP67
CAN I/O Box
CAN I/O Module Box
Current consumption: max. 300 mA Interfaces: CAN, CANopen DS 401, Interface Device Profile for Generic I -O, default Baudrate 250 KBaud Inputs: 8 digital inputs pnp/npn Outputs: 8 digital outputs 2.6 A per output Processor: 64 + 16 KByte...
Signal Conditioner SC-102
Signal Conditioner SC-102
Operating voltage / Lithium Ion Battery: 3.7 V DC Loadcell voltage range Usig: 5 V DC Number of Load Cells: 2 Signal input: 0-2.5 V Measurement rate: 100 Hz / 2 Channels Indicator: LED Interfaces: 1x CANopen with Bluetooth Modul, 2.0...
LED built-on indicator Duo Level IV
LED Built-on Indicator Duo-Level Indicator IV
Current consumption: Connectors: 1x 7 pin male connector, 1x 2 pin male connector Weight: approx. 1 kg Ingress Protection: IP65
LED Built-In Indicator
LED Built-in Indicator Duo-Level-Display III
Max. resolution (per LED): 0.2° Current consumption: Weight: approx. 300 g Ingress Protection: IP66 Fitting: Attachment screw
LED Built-on indicator Duo Level II
LED Built-on Indicator Duo-Level Indicator II
Max. Resolution: 0.1° per LED Current consumption: Connectors: 1x 7 pin male connector, 1x 2 pin male connector Weight: approx. 1 kg Ingress Protection: IP65
Dual Slope Indicator
LCD Dual Slope Indicator
Current consumption: Interfaces: CAN ISO 11898 – 24 V; 125 kBits/sec Connectors: 1x 2 pin male srewed connection, 1x 7 pin female bayonette connector Manner of fastening: Star Handle Screw Housing material: Aluminium Weight: approx. 1.75 kg
Slope Sensor +/-60°
Slope Sensor CAN, X/Y-Axis ± 60°
Measuring range: X/Y-Axis, ± 60° Connector: 7 pin male connector, bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67
Mobile Signal Controller MSC-113
Mobile Signal Controller MSC-113
Inputs / Outputs: 2 x 4 (8) of Inputs: digital high side or analogue 0-25 mA, 0-32 Vdc 2 x 2 (4) of Inputs: digital high side or analogue 0-25 mA, 0-5.5 Vdc, 0-32 Vdc with pull up to read a PTC sensor 2 x 4 (8) of Digital/PWM high side...
Handheld Transponder Reader BTR-2
Handheld Transponder Reader BTR-2
Handheld RFID Transponder Reader for FDX, HDX, and LF Transponder. Rugged designed for logistics and waste management market.
RFID Tooth Antenna Combi
RFID Tooth Antenna
Material: PA 6 Connector: 1 Meter cable 4 pol. with Cannon connector for Zoeller antenna preparation
RFID Antenna MSTX-S
RFID Antenna MSTX
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 136 mm length x 25 mm width x 50 mm height Weight: 300 g
RFID Antenna STL1
RFID Antenna STL1
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 200 mm length x 20 mm width x 20 mm height Weight: 180 g
RFID Antenna OHZ
RFID Antenna OHZ
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 80 mm length x 40 mm width x 40 mm height Weight: 610 g
RFID Antenna DBR
RFID Antenna DBR
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 70 mm length x 40 mm width x 40 mm height Weight: 550 g
RFID Antenna VDK
RFID Antenna VDK
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 230 mm length x 25 mm width x 25 mm height Weight: 260 g
GPS Antenna Garbage Trucks
GPS Antenna MNL-604P
GPS receiver with connector Operand, M16 for mounting on the machine's roof. Interfaces: RS232, Tx, Rx, GND Protocols: NMEA 0183, GGA, GSA, GSV, RMC (optional VTG, GLL) Ingress protection: IP67 (waterproof)
Analog Slope Sensor
Analog Slope Sensor
Measuring range: 1-Axis, ± 10% Connection: 6 pin male plug, screwed connection Ingress Protection: IP67 Weight: 1.2 kg
Slope Sensor CANopen
Slope Sensor CANopen, X/Y-Axis ± 60°
Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin male connector M12, 1x 5 pin female connector M12 Interface: CAN ISO 11898 – 24 V 250 kBit/sec Ingress Protection: IP67 Weight: 700 g
134,2 kHz Transponder Collection
Transponder 134,2 kHz
Frequency: 134.2 kHz Modulation: FSK, HDX Programmability: Read Only Conformity: DIN EN 30745, EN 14803
Transponder Puck 1.1
Transponder Type Puck 1.1
For Metal Containers Shock: 300 g, 2 Axes, IEC 68-2-27, Test Ea Vibration: 15 g from 10 - 2000 Hz, 2 Axes, IEC 68-2-6, Test Fc Programmability: Read Only Typical reading distance: approx. 50 cm Typical reading time: 100 ms Conformity:...
Transponder Puck-MSTS
Transponder, Puck-MSTS, R/O, BDE
Shock: 300 g, 2 Axes, IEC 68-2-27, Test Ea Vibration: 15 g from 10 - 2000 Hz, 2 Axes, IEC 68-2-6, Test Fc Programmability: Read Only Typical reading distance: ca. 30 cm Typical reading time: 100 ms Weight: 7g Conformity: DIN EN 30745, EN...
UHF Transponder
UHF-Transponder InLine Ultra Slim
Work-/Operating frequency: 865-956 MHz (EU, US, JP) Data space: 128 bit EPC + 96 bit TID + 512 bit user memory Reading distance: up to 4 Meters Housing material: PC/ABS (high shock resistance) Fixing hole: Ø 5.2 mm Standards/Regulations:...
HP-Transponder for Containers
HP-Transponder for Containers
Programmability: Read Only Typical reading distance: ca. 80 cm Typical reading time: 100 ms Vibration: 10 g from 10 - 2000 Hz, 2 Axes, IEC 68-2-6, Test Fc Weight: 45 g Ingress Protection: IP67
Analog Rotary Sensor contactless
Analog Rotary Sensor Contactless ± 30°
Measuring range: ± 30° Connector: 6 pin plug; screwed connection Ingress Protection: IP67 Weight: approx. 900 g
Analog Rotary Sensor
Analog Rotary Sensor Contactless ± 156°
Measuring range: ± 156° Connection: 6 pin plug; screwed connection Ingress Protection: IP67 Weight: 750 g
Slope Sensor CAN 04-21-20303
Slope Sensor CAN, X/Y-Axis ±60°
Measuring range: X/Y-Axis, ± 60° Connector: 7 pin bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67 Weight: 700 g
Slope Sensor MSSR-322
Slope Sensor MSSR-322, CANopen X/Y-Axis ± 60°
Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin female socket, Binder M12, 1x male socket, Binder M12 Interface: CANopen CiA DS301 Ingress Protection: IP67 Weight: 300 g
Slope Sensor MSSR-330
Slope Sensor MSSR-330, CANopen X-Axis ± 180°
The slope sensor works with a high-precision, micro-mechanical sensor element serving to record the angle of attack of the wheel loader truck lift frame.
Power Connecting Box GS-506
Power Connection Box
Connectors: 20 x 6,3 mm flat blade connector Current consumption (rated value): 80 mA Ingress Protection: IP65
Controller GS-506
Controller GS-506, CAN-Valves
Outputs: 4x ON/OFF or PWM (1 kHz), NPN or PNP, max. 3 A, or 4x Danfoss Interfaces: 3x CAN ISO 11898 – 24 V 125 kBits/sec Connectors: 1x 7 pin male screwed connection, 1x 7 pin female bayonet connection, 1x 10 pin female screwed...
Controller MLC-580
Controller MLC-508
Outputs: 7x current controlled valve outputs, max. 3 A, Interfaces: 3x CAN ISO 11898 – 24 V 125 kBits/sec Connectors: 2x 7 pin male screwed connection, 1x 19 pin screwed connection, 1x 10 pin female screwed connection Ingress Protection:...
Multi-switch unit MSU-100 GS-506 leveling system
Multi-switch Operating Unit MSU-100
Multi-switch Unit MSU-100 for the leveling system GS-506: Brightness-dependent control of the status LED´s Interface: CAN ISO 11898 – 24 V125 kBits/sec Ingress Protection: IP65 (with closed protection cap) Weight: 300 g
Handset Smart Amp for S-276 Slope Controller
Handset SmartAmp
Voltage range: 6 V DC Current consumption: 12 mA Ingress Protection: IP54 Connector: 5 pin female connector; screwed connection Length connecting cable: 1 Meter coiled Weight: 720 g
Mobile process amplifier MPA-100
Mobile Process Amplifier MPA-100
The MPA-100 is an integrated digital controller with LCD based HMI for easy operation severeal sensor signals can be processed by the controller. The controller has fault diagnosis capability for easy troubleshooting. Digital Inputs:...
Sonic Ski PWM
Multiple Ultrasonic Sensor Sonic-Ski PWM
Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski® PWM sensor is the first such...
Multiple Ultrasonic Sensor Sonic-Ski Plus
Multiple Ultrasonic Sensor Sonic-Ski Plus...
Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski ® plus sensor is the first such...
Big Sonic-Ski modular kit
Big Sonic-Ski Modular Kit
This kit exists of an up to 13 m long mechanic assembly with dismountable swing arms and a respective electronic kit of up to 4 ultrasonic sensors. 4 sensors achieve the most precise and even results, in particular, with respect to road...
Junction Box for Big Ski with 4 sensors
Junction Box for Big Sonic-Ski with 4 Sensors
Junction Box to connects 4 grade sensors with CAN interface for averaging. It operates only with Operating Panel MOBA-matic II "MMC-2000" 04-25-10500-A02. Interfaces: CAN ISO 11898 – 24 V – 125 kBit/sec Connectors: 1x CA 7 pole bay....
Junction Box for Big Ski with 3 Sensors
Junction Box for Big Sonic-Ski with 3 Sensors
Junction Box to connects 3 grade sensors with CAN interface for averaging. Interfaces: CAN ISO 11898 – 24 V – 125 kBit/sec Connectors: 1x CA 7 pole bay. female (to controller), 3x CA 7 pole bay. male (to sensors) Weight: approx. 1.2 Kg...
GNSS Antenna
GNSS Antenna
Assesses the exact position of the machine within a terrain via GNSS coordinates, thereby reducing manual surveying to up to 90% and optimizing usability. The antenna is easy to handle for installation as well as servicing. Single and...
Grade Controller G-176 M Kit
Grade Controller G-176 M Kit
Mechanical Grade Control 2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy to operate Robust quality Stringline- or ground sensing Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are...
Grade control G-176 MS
Combi Grade Controller G-176 MS
Level control with ultrasonic sensor and synchro-transmitter Mechanical and ultrasonic sensing with one unit Allows flexible sensing Set-point adjustable via remote control Ground sensing without additional mechanical components...
mechanical Grade Control G-176 Plus
Grade Controller G-176 Plus Kit
2 adjustable valve outputs: ON/OFF, PNP o. NPN, 10…190 ms min. puls Easy to operate Mechanical sensing Wear-resistant sensor Remote handset (optional) Digital sensor and module Less broken operating panel cause of flat operating surface...
contactless grade control G-176 Sonic Plus
Grade Controller G-176 Sonic Plus Kit
2 adjustable valve outputs: ON/OFF, PNP o. NPN, 10…190 ms min. puls Easy to operate Contactless sensing 3 Ultrasonic Transducers Wear-resistant sensor High accuracy by multi-sonic technology Digital sensor and module Less broken...
Sonic-Ski Plus Sensor with Sideshift function
Multiple Ultrasonic Sensor Sonic-Ski Plus,...
Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski ® Plus sensor is the first such...
Slope Control S-276 M
Slope Controller S-276 M Kit with LCD Handset
2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy handling with LCD Handset Robust quality Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are interchangeable S-276 M Kit consisting...
Slope control S-276 Plus
Slope Controller S-276 Plus Kit
2 valve outputs: ON/OFF, PNP or NPN, 10…190 ms min. puls Vibration protected sensor Digital sensor, handset and module Flat operating surface Easy to operate High accuracy Reliable quality Control modules for grade and slope controllers...
Transponder Reader Ident Control IDC-30
Transponder Reader Ident Control IDC-30 CAN
Mobile and stationary identification of HDX transponders (IDC-30 CAN and IDC-30-422) or UHF transponders (IDC-30 CAN UHF). Ingress protection: IP66 Certification: EN 300330, EN 301489, EN 50357
Filling Level Sensor FLS-100
Filling Level Sensor FLS-100
The FLS-100 wireless level sensor is designed to record and monitor the filling level of waste containers. The sensor is installed on the lid of a container – no matter whether it is an underground, semi-underground or standard container.
Operating Unit
Operating Units
Ingress protection: IP67 Interfaces: CAN (protocol according to CANopen DS401; Device Profile for Generic I/O Modules) Certification: CE according to EMV guideline 89/336/EWG
Ignition Box IS-03
Ignition Box IS-03
Ignition Box for Automatic Gas Ignition and Flame/Temperature control
Iginition Box IS-01
Ignition Box IS-01
Ignition box for automatic Gas ignition and flame control on asphalt paver screeds
Mobile Signal Conditioner MTSC-202
Mobile Signal Conditioner MTSC-202
Conversion for distance / speed / position Interface: CANopen / 250 k Connectors: 5 pole Binder M12
Mobile Signal Conditioner MTSC-203
Mobile Signal Conditioner MTSC-203
Conversion from digital signals to CAN Small, robust design Automatic or manual processing CAN interface Connectors: 5 pole Binder M12
Graphic Display GDC-320
Graphic Display GDC-320
Easy to operate CODESYS programmable Clear indication of all connected sensors Clear, visual icon driven instructions CAN Interface: CANopen Connectors: 5 pole M12, male (CAN in), 5 pole M12, female (CAN out)
On-Board Computer Operand MCA
On-Board Computer Operand MCA
High-tech computer with ultra fast processor, high-res display and latest software. It optimizes data management from the cabin of the machine and enhances usability. It has anti-glare and transflective display (range of vision 100°) and...
On-Board Computer PAVE-IR
On-Board Computer Operand PAVE-IR
High-tech computer with ultra fast processor, high-res display and latest software. It optimizes data management from the cabin of the machine and enhances usability. It has anti-glare and transflective display (range of vision 100°) and...
SIM BOX
SIM BOXES
With the MOBA SIMBox, MOBA offers developers the possibility of quickly implementing solutions based on MOBA controllers. Furthermore, it is a programmable simulation box, which can be configured by a specially designed software tool. In...
Power Mast ETM-900
Power Mast ETM-900
The Power Mast ETM-900 increases the laser receiver’s reception range considerably, since the sensor can follow up the entire adjustment range of the lift cylinder. As another advantage the user can position the laser receiver very...
Pressure Transmitter
Pressure Transmitters
Measure hydraulic pressure in front of and behind the hydraulic cylinder Sensor interfaces: PWM/analog Robust designed
Acceleration Sensor MAS-180
Acceleration Sensors
Detects the tamper's vibration Improves the machine's driving signal Robust design CAN-Interfaces
LED Display XD2
LED Display XD2
Displays current working status Clearly visible LEDs
RS-232/USB Converter Cable USB-100
RS-232 to USB Converter Cable USB-100
Cable length: 2 Meter or 5 Meter
Operating Panel Dual Laser-matic
Operating Panel Dual Laser-matic
HMI with graphic display Easy operation via push buttons Clearly arranged display Temperature-stable LCD display Rugged design with the estabilshed MOBA sealing method LEDs support the panel display Individual parameter settings Slope...
Controller MCC15
Controller MCC15
Processes all incoming position data Compares the position of the bucket with the design data
Single Housing Unit
Single Housing Units
Small production quantities possible Combination of proven standard modules Modifications easily adjustable Flexible extension modules CAN/CANopen Modular concept Flexible mounting possibilities Links via plug connections Special potting...
Triple Housing Unit
Triple Housing Units
Small production quantities possible Combination of proven standard modules Modifications easily adjustable Flexible extension modules CAN/CANopen Modular concept Flexible mounting possibilities Links via plug connections Special potting...
Joystick Module, non-lockable
Joystick Modules
Small production quantities possible Combination of proven standard modules Modifications easily adjustable Flexible extension modules CAN/CANopen Modular concept Flexible mounting possibilities Links via plug connections Special potting...
Keypad Module 6 Keys with emergency stop
Keypad Modules
Small production quantities possible Combination of proven standard modules Modifications easily adjustable Flexible extension modules CAN/CANopen Modular concept Flexible mounting possibilities Links via plug connections Special potting...
Display Module
Display Modules
Small production quantities possible Combination of proven standard modules Modifications easily adjustable Flexible extension modules CAN/CANopen Modular concept Flexible mounting possibilities Links via plug connections Special potting...
GNSS / SBAS Antenna
GNSS / SBAS Smart Antenna
Assesses the exact position of the machine within a terrain via GNSS coordinates, thereby reducing manual surveying to up to 90% and optimizing usability. The antenna is easy to handle for installation as well as servicing. High...
Digi Rotary Distance sensor
Digi Rotary Sensor
Can be used under all climatic conditions Operates in stringline and ground sensing modes Measuring range: ± 30° Measuring accuracy of over ± 0.1° Operating temperature range: -10 ...+70°C Ingress protection: IP67 CAN Interface
On-Board Computer Operand Typ D
On-Board Computer MOBA Operand Type D
High-tech computer with ultra fast processor, high-res display and latest software. It optimizes data management from the cabin of the machine and enhances usability. It has anti-glare and transflective display (range of vision 100°) and...
5-Channel Laser Receiver CLS 3000
5-Channel Laser Receivers CLS 3000
The CLS3000 machine receiver provides you with accurate height information for all optical machine control applications, with a reception range of 360°. The Laser Receiver is mounted to the mast with brackets. This guarantees a quick...
Proportional Laser Receivers LS 3000
Proportional Laser Receivers LS 3000
The LS3000 machine receiver provides you with accurate height information for all optical machine control applications, with a reception range of 360°. The Laser Receiver is mounted to the mast with brackets. This guarantees a quick...
Laser receiver EL3
Laser Receiver EL3
The EL3 excavator receiver provides you with accurate height data for all optical machine control applications, with a reception range of 240°. The laser receiver is attached to the excavator stick by using extra strong magnets or...
Communication Gateways CG-1
Communication Gateways CG-1
CAN-Gateway Keyboard with 16 keys, RESET function Display: 128x64 monochrome Compact and rugged design GPRS module GPS mouse Bluetooth (optional) Micro SD card CE according to EMC guideline
Operating Panel Xsite PRO
Operating Panel Xsite PRO
8.4” rugged touch-screen display Transflective TFT-LCD Touch screen type: capacitive Resolution: 800x600 pixels (SVGA) Dimensions: 263 x 237 x 65 mm Weight: 1.9 kg Interfaces: LVDS, 2x USB
Mobile Process Controller MPC-120
Mobile Process Controllers - MPC
MOBA Mobile Process Controllers (MPC) are designed and manufactured for use on heavy duty machines. MOBA MPCs distinguish themselves through their outstanding quality and are suitable for application in different markets.
Cross Slope Sensor CANopen
Cross Slope Sensor
Measuring range: X-axis ±60° Interface: CAN ISO 11898 – 24 V – 125 kBit/sec Dynamic detection of the coulter inclination, longitudinal machine inclination and coulter rotation Operates with a dynamic liquid sensor
IR-Spot
IR Temperature Sensor IRspot
Cable length: 1 Meter Interface: I²C (supposed to work with MTSC-201) Connector: 5 pole M12, male Ingress protection: IP65
Gravitation Sensor G-1
Slope Sensor G-1
Measuring axis: X, Y, Z (three-axis) Resolution: 0.05° Measuring range: 360° per axis IP classification IP67
MRW Load Cells
MRW Load Cells
Highly precise load control of the aerial work platform basket or mobile cranes. The weighing cells provide high accuracy caused by compensating the lever arm effect and is able to compensate the temperature effect on the zero point,...
Proportional Hydraulic Valve
Proportional Hydraulic Valve Unit - GS-506
The proportional hydraulic valve unit converts signals into motion. The hydraulic unit controls the cylinder movements based on signals generated by the controller. The specially developed proportional valves ensure that the speed of the...
Weather Station
Weather Station
Wind speed Barometric pressure Air temperature Humidity Interface:CAN NMEA2000/250k
Acceleration Cell
Acceleration Cell Type BB
Compensation for acceleration during the weighing of moving objects Overload-proof up to 2kg High accuracy and interference resistance Low space requirements
Load Cell for Dynamic Scales
Load Cell Type ED21 for Dynamic Scales
Fully automated weighing of containers during the tipping process Useable in 0.5 kg steps for 2 wheel container and in 2.0 kg steps for 4 wheel container Low space requirements Stainless steel
Load Cell for Body Scale
Load Cell Body Scale
Maintenance-free Force-fit connection, no locking necessary Overload protection and breakaway quick-closing device Easy operation/set-up, assembly kit for vehicle manufacturers
Frontloader Scale
Load Cell for Front Loader Scale
Maintenance-free Force-fit connection, no locking necessary Overload protection and breakaway quick-closing device Low space requirements Easy installation, assembly kits for all vehicle manufacturers
IR Temperature Scanner
PAVE IR Thermal Profile Sensor MTPS-100
Infrared scanner MTPS-100 for exact surface temperature measurment Technical data: Interface: CAN / 250 k Connector: 7 pole bay, male
Material Distance Sensor MOBA-Sonic III
Material Control Sensor MOBA Digi-Sonic III
Ultrasonic sensor that precisely measures the distance from the screed to the material in order to assess the exact quantity of material left and to optimally monitor the material flow. Contact-free ground sensing Real-time temperature...
Wire Rope Sensor ROPS-0900
Wire Rope Sensor ROPS-0900
This wire-rope sensor is a common sensor for distance detection and is typically used in combination with the side plate. Via a steel wire rope which is fixed at the side plate, the sensor recognizes any change in height. It is the most...
1 From 2
Viewed