No results were found for the filter!
The GNSS Receiver LEANDER-3000 is a new generation GNSS RTK system. Indeed, LEANDER-3000 tracks multi-constellation GPS, GLONASS, Galileo, BeiDou etc. and can maximize the acquisition and tracking process with all-in-view GNSS satellite...
Specially developed for use on a highly vibrating screed, the G-Slope sensor filters out interfering variables thanks to intelligent algorithms.
The GNSS compass provides important data, which is both essential for the orientation of the upper structure and the basis for adjusting the target slope. It completes the 2D system and optimizes it for working on sloped surfaces.
The multiple ultra sonic sensor Sonic-Ski plus sensor is the first such device equipped with multiple ultrasonic oscillators. Five sensors determine the distance to the reference point, while a sixth is used for temperature compensation...
To achieve a constant asphalt layer thickness, the ultrasonic sensor is the optimum solution for regulating the quantity of material in front of the screed.
X-axis, +/- 60° Gyro-Sensor Interface: CAN ISO 11898-24 V 125 kbit/s 40 Hz Connector: 7 pin bayonet type connection Weight: 1.3 kg Ingress Protection: IP67
To achieve a constant asphalt layer thickness, the ultrasonic sensor is the optimum solution for regulating the quantity of material in front of the screed.
Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Measuring range: ± 10° Output signal: 4-20 mA 600 Ohm Current consumption: Shock resistance: 15 g, 15 ms Connector: 5 pin male connector Weight: approx. 1 kg Ingress Protection: IP67
Measuring range: ± 5° Output signal: 2x 4 ...20 mA (max.600 Ohm) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Measuring range: ± 5° Output signal: 2 x 4-20 mA (Last max. 500 π) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: approx. 1.8 kg Ingress Protection: IP67
Measuring range: X/Y-Axis, ± 60° Connector: 7 pin male connector, bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67
Material: PA 6 Connector: 1 Meter cable 4 pol. with Cannon connector for Zoeller antenna preparation
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 136 mm length x 25 mm width x 50 mm height Weight: 300 g
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 200 mm length x 20 mm width x 20 mm height Weight: 180 g
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 80 mm length x 40 mm width x 40 mm height Weight: 610 g
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 70 mm length x 40 mm width x 40 mm height Weight: 550 g
Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 230 mm length x 25 mm width x 25 mm height Weight: 260 g
GPS receiver with connector Operand, M16 for mounting on the machine's roof. Interfaces: RS232, Tx, Rx, GND Protocols: NMEA 0183, GGA, GSA, GSV, RMC (optional VTG, GLL) Ingress protection: IP67 (waterproof)
Measuring range: 1-Axis, ± 10% Connection: 6 pin male plug, screwed connection Ingress Protection: IP67 Weight: 1.2 kg
Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin male connector M12, 1x 5 pin female connector M12 Interface: CAN ISO 11898 – 24 V 250 kBit/sec Ingress Protection: IP67 Weight: 700 g
Measuring range: ± 30° Connector: 6 pin plug; screwed connection Ingress Protection: IP67 Weight: approx. 900 g
Measuring range: ± 156° Connection: 6 pin plug; screwed connection Ingress Protection: IP67 Weight: 750 g
Measuring range: X/Y-Axis, ± 60° Connector: 7 pin bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67 Weight: 700 g
Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin female socket, Binder M12, 1x male socket, Binder M12 Interface: CANopen CiA DS301 Ingress Protection: IP67 Weight: 300 g
The slope sensor works with a high-precision, micro-mechanical sensor element serving to record the angle of attack of the wheel loader truck lift frame.
Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski® PWM sensor is the first such...
Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski ® plus sensor is the first such...
This kit exists of an up to 13 m long mechanic assembly with dismountable swing arms and a respective electronic kit of up to 4 ultrasonic sensors. 4 sensors achieve the most precise and even results, in particular, with respect to road...
Assesses the exact position of the machine within a terrain via GNSS coordinates, thereby reducing manual surveying to up to 90% and optimizing usability. The antenna is easy to handle for installation as well as servicing. Single and...
Mechanical Grade Control 2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy to operate Robust quality Stringline- or ground sensing Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are...
Level control with ultrasonic sensor and synchro-transmitter Mechanical and ultrasonic sensing with one unit Allows flexible sensing Set-point adjustable via remote control Ground sensing without additional mechanical components...
2 adjustable valve outputs: ON/OFF, PNP o. NPN, 10…190 ms min. puls Easy to operate Mechanical sensing Wear-resistant sensor Remote handset (optional) Digital sensor and module Less broken operating panel cause of flat operating surface...
2 adjustable valve outputs: ON/OFF, PNP o. NPN, 10…190 ms min. puls Easy to operate Contactless sensing 3 Ultrasonic Transducers Wear-resistant sensor High accuracy by multi-sonic technology Digital sensor and module Less broken...
Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski ® Plus sensor is the first such...
2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy handling with LCD Handset Robust quality Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are interchangeable S-276 M Kit consisting...
2 valve outputs: ON/OFF, PNP or NPN, 10…190 ms min. puls Vibration protected sensor Digital sensor, handset and module Flat operating surface Easy to operate High accuracy Reliable quality Control modules for grade and slope controllers...
The FLS2 wireless level sensor is designed to record and monitor the filling level of waste containers. The sensor is installed on the lid of a container – no matter whether it is an underground, semi-underground or standard container.
Measure hydraulic pressure in front of and behind the hydraulic cylinder Sensor interfaces: PWM/analog Robust designed
Detects the tamper's vibration Improves the machine's driving signal Robust design CAN-Interfaces
Assesses the exact position of the machine within a terrain via GNSS coordinates, thereby reducing manual surveying to up to 90% and optimizing usability. The antenna is easy to handle for installation as well as servicing. High...
Can be used under all climatic conditions Operates in stringline and ground sensing modes Measuring range: ± 30° Measuring accuracy of over ± 0.1° Operating temperature range: -10 ...+70°C Ingress protection: IP67 CAN Interface
The MOBA Slope Sensor has to be mounted on the screed to detect the current slope of the working tool. The unit offers the accuracy required even if operated with heavy vibration (compaction) and high temperature environments.
The CLS3000 machine receiver provides you with accurate height information for all optical machine control applications, with a reception range of 360°. The Laser Receiver is mounted to the mast with brackets. This guarantees a quick...
The LS3000 machine receiver provides you with accurate height information for all optical machine control applications, with a reception range of 360°. The Laser Receiver is mounted to the mast with brackets. This guarantees a quick...
The EL3 excavator receiver provides you with accurate height data for all optical machine control applications, with a reception range of 240°. The laser receiver is attached to the excavator stick by using extra strong magnets or...
Measuring range: X-axis ±60° Interface: CAN ISO 11898 – 24 V – 125 kBit/sec Dynamic detection of the coulter inclination, longitudinal machine inclination and coulter rotation Operates with a dynamic liquid sensor
Cable length: 1 Meter Interface: I²C (supposed to work with MTSC-201) Connector: 5 pole M12, male Ingress protection: IP65
Measuring axis: X, Y, Z (three-axis) Resolution: 0.05° Measuring range: 360° per axis IP classification IP67
Highly precise load control of the aerial work platform basket or mobile cranes. The weighing cells provide high accuracy caused by compensating the lever arm effect and is able to compensate the temperature effect on the zero point,...
Compensation for acceleration during the weighing of moving objects Overload-proof up to 2kg High accuracy and interference resistance Low space requirements
Fully automated weighing of containers during the tipping process Useable in 0.5 kg steps for 2 wheel container and in 2.0 kg steps for 4 wheel container Low space requirements Stainless steel
Maintenance-free Force-fit connection, no locking necessary Overload protection and breakaway quick-closing device Easy operation/set-up, assembly kit for vehicle manufacturers
Maintenance-free Force-fit connection, no locking necessary Overload protection and breakaway quick-closing device Low space requirements Easy installation, assembly kits for all vehicle manufacturers
Infrared scanner MTPS-100 for exact surface temperature measurment Technical data: Interface: CAN / 250 k Connector: 7 pole bay, male
Ultrasonic sensor that precisely measures the distance from the screed to the material in order to assess the exact quantity of material left and to optimally monitor the material flow. Contact-free ground sensing Real-time temperature...
This wire-rope sensor is a common sensor for distance detection and is typically used in combination with the side plate. Via a steel wire rope which is fixed at the side plate, the sensor recognizes any change in height. It is the most...
Measuring range: 20 to 1.000 mm Real-time temperature compensation Fixed temperature probe Ingress protection: IP67 CAN-Interface
The rotation sensor works together with the slope sensor. The sensor measures the value of the blade rotation. Together with the slope sensor, it provides optimum compensation for cross slope.
The GS-506 connection box with slope sensor makes the correct connections. The connecting box is the connection point for all sensors active in the system. This makes cable routes shorter, thereby reducing possible sources of errors. The...
Compact, flat design Optimised for immunity to vibration and acceleration Quick measurements – optimal automatic levelling Zero adjustment via infrared interface
The DSM-500 ultrasonic measurement system consists of two sensors, a master and a slave. Each of these sensors acts alternately as transmitter and receiver. Additional safety measures result in approval according to DIN EN ISO 13849 PL d
The rotation sensor (depth sensor) serves to record the drill hole size/depth. The Rotation movement is converted into a linear movement. The required factor is calculated at the initial assembly’s calibration. The boom sensor kit serves...
Infrared remote handset for zeropoint setting Recalibrates the zero point for MSS sensor types within an absolute angle range of ±2°
Temperature sensor Aluminium solid with shieled connecting cable Temperature range: -40° to +250° Cable: 6.3 Meters
Acceleration Material Multiple 5-Channel Laser Rotation Sensor Combi Grade IR Temperature Analog Slope Proportional Digi Rotary Slope Sensor X Load Cell Body Material Multiple Pressure GNSS Antenna Slope Sensor Grade Cross Slope Connection Box Slope Material Multiple Load Cell for PAVE IR Thermal Grade Slope Sensor X MRW Load Cells Wire Rope MRS Rotation Infrared Remote Multiple DSM-500 Kit Slope Sensor G-Slope LSTA GNSS SBAS Smart Cross Slope Weather Station Big Sonic-Ski Load Cell Type MRW-LIMIT Slope Sensor X GNSS RTK MSS Slope Laser Receiver Slope Sensors -
Viewed