Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Cross Slope Sensor MGS-0600
Cross Slope Sensor MGS-0600
X-axis, +/- 60° Gyro-Sensor Interface: CAN ISO 11898-24 V 125 kbit/s 40 Hz Connector: 7 pin bayonet type connection Weight: 1.3 kg Ingress Protection: IP67
Slope Sensor Duo Level IV
Slope Sensor X/Y-Axis, Duo-Level-Encoder IV
Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Slope Sensor Duo Level III
Slope Sensor X/Y-Axis, Duo-Level-Encoder III ± 10°
Measuring range: ± 10° Output signal: 4-20 mA 600 Ohm Current consumption: Shock resistance: 15 g, 15 ms Connector: 5 pin male connector Weight: approx. 1 kg Ingress Protection: IP67
Slope Sensor Duo Level III
Slope Sensor X/Y-Axis, Duo-Level-Encoder III ± 5°
Measuring range: ± 5° Output signal: 2x 4 ...20 mA (max.600 Ohm) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Slope Sensor Duo Level II
Slope Sensor X-Axis, Duo-Level-Encoder II
Measuring range: ± 5° Output signal: 2 x 4-20 mA (Last max. 500 π) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: approx. 1.8 kg Ingress Protection: IP67
Analog Slope Sensor
Analog Slope Sensor
Measuring range: 1-Axis, ± 10% Connection: 6 pin male plug, screwed connection Ingress Protection: IP67 Weight: 1.2 kg
Slope Sensor CAN 2-axes
Slope Sensor CAN, X/Y-Axis ± 60°
Measuring range: X/Y-Axis, ± 60° Connector: 7 pin male connector, bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67
Slope Sensor CANopen
Slope Sensor CANopen, X/Y-Axis ± 60°
Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin male connector M12, 1x 5 pin female connector M12 Interface: CAN ISO 11898 – 24 V 250 kBit/sec Ingress Protection: IP67 Weight: 700 g
Slope Sensor CAN 04-21-20303
Slope Sensor CAN, X/Y-Axis ±60°
Measuring range: X/Y-Axis, ± 60° Connector: 7 pin bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67 Weight: 700 g
Slope Sensor MSSR-322
Slope Sensor MSSR-322, CANopen X/Y-Axis ± 60°
Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin female socket, Binder M12, 1x male socket, Binder M12 Interface: CANopen CiA DS301 Ingress Protection: IP67 Weight: 300 g
Slope Sensor MSSR-330
Slope Sensor MSSR-330, CANopen X-Axis ± 180°
The slope sensor works with a high-precision, micro-mechanical sensor element serving to record the angle of attack of the wheel loader truck lift frame.
Slope Control S-276 M
Slope Controller S-276 M Kit with LCD Handset
2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy handling with LCD Handset Robust quality Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are interchangeable S-276 M Kit consisting...
Slope control S-276 Plus
Slope Controller S-276 Plus Kit
2 valve outputs: ON/OFF, PNP or NPN, 10…190 ms min. puls Vibration protected sensor Digital sensor, handset and module Flat operating surface Easy to operate High accuracy Reliable quality Control modules for grade and slope controllers...
Slope Sensor
Slope Sensor CANopen, ± 10°
X/Y-Axis, ± 10° Interfaces: CAN ISO 11898 - 24 V - 125 kBit/sec. Connectors: 5 pol M12 female, 5 pol M12 male Ingress protection: IP68
Gravitation Sensor G-1
Slope Sensor G-1
Measuring axis: X, Y, Z (three-axis) Resolution: 0.05° Measuring range: 360° per axis IP classification IP67
Connecting Box with Long Slope Sensor GS506
Connection Box with Long Slope Sensor - GS-506
The GS-506 connection box with slope sensor makes the correct connections. The connecting box is the connection point for all sensors active in the system. This makes cable routes shorter, thereby reducing possible sources of errors. The...
Cross Slope Sensor
Cross Slope Sensor
Maintains specified slope values. The cross-slope sensor works with a dynamic fluid sensor. It records current measurement values for blade slope, vehicle inclination and blade rotation, while taking into consideration interfering...
Digi Slope Sensor
Slope Sensors - MOBA-matic
The MOBA Slope Sensor has to be mounted on the screed to detect the current slope of the working tool. The unit offers the accuracy required even if operated with heavy vibration (compaction) and high temperature environments.
Slope Sensor MSS-322
MSS Slope Sensors
Compact, flat design Optimised for immunity to vibration and acceleration Quick measurements – optimal automatic levelling Zero adjustment via infrared interface
Infrarot Handset IRC-100
Infrared Remote Unit IRC-100
Infrared remote handset for zeropoint setting Recalibrates the zero point for MSS sensor types within an absolute angle range of ±2°
Viewed