Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Magnet holder Kit Weather station IR sensor
Magnet holder Kit
Magnet holder Kit for for Brackets, IR Temperature sensor and Weather Station. It consists of magnet, Screw, nut M8 and washer.
Stay-Tube Weather Station
Stay-Tube
Stay-Tube for Weather Station with cable feedthrough
Power Cable "Xsite PRO / Xsite PRO ADVANCED"
Power Cable "Xsite PRO / Xsite PRO ADVANCED"
Power Cable for Xsite PRO / Xsite PRO ADVANCED Operating Panel.
Power Switch Cable Xsite PRO
Power-switch Cable for MCC15
This Power Cable is needed when power to GNSS receiver is taken via the "CB2" Box.
Power Cable XD2
Power Cable for LED Display "XD2"
Cable length: 5 Meter
Straight Connecting Cable 1m
Cables, Straight CAN connection 1m
Cable with straight connectors at both ends. Connectors: 7-pin Bay. - 7-pol Bay.
Standard Cable CAN Connection
Standard Cables, CAN Connection
Connectors: 7pol Bay. 90° to 7pin Bay.
USB Cable
USB Data Cable
Connectors: USB A to USB mini B
GNSS Antenna Cable 10m
GNSS Antenna Cable
Cable length: 10 Meter Connectors: TNC male - TNC male
Antenna Cable 10m
Radio Antenna Cable 10m
Cable length: 10m Connectors: TNC female - TNC male
Power Cable Xsite EASY
Power Cable "Xsite EASY"
Power Cable for Xsite EASY Operating Panel.
Power Cable GS-506 Controller
Power Cable GS-506 Controller
Power cable for power supply of controller/system "GS-506". Cable length: 6 Meter Connectors: 7 pin screw connection to open end
Y-Coil cable
Y-Coil Cable, R-30cm/6m Connection
Y-Coil cable, R-30 cm / 6 m connection between controller, machine and slope sensor Cable length: 6 Meter (stretched) / 0.3m incl. 1 x 120 Ohm CAN bus resistor Connectors: CA 10 pole male coupling (controller), CA 10 pole female...
Coil Cable, 3m connection sonic/machine, 6-pin to open end
Coil Cable, 3 m Connection Sonic/Machine, 6-pin...
6 pin Connection Coil cable to connect the Sensor Sonic-Ski with the Machine.
Coil Cable Connection Sensor Machine
Coil Cable, Connection Sonic/Machine, 5-pin
5 pin Connection Coil cable to connect the Sensor Sonic-Ski with the Machine.
Coil Cable Connection Sensor Machine 6pin
Coil Cable, Connection Sonic/Machine, 6-pin
Coil Cable to connect Sonic-Ski with the machine.
Coil Cable MOBA-matic Controller 6m
Coil Cable, 6m Connection Controller/Sensor
Cable length: 6m (stretched) Connectors: CA 7pole, male, CA 7pole, female
Cable M12, CAN
Cable M12, CAN
M12 Cable CAN Connectors: 5 pole M12, male, 5 pole M12, female
USB Cable 2m
USB Adapter Cable
USB Adapter Cable to connect "MOBA-Drive" to a "Windows Office" PC Connectors: USB-A, 4-pin female
Adapter cable
Adapter Cable, CA/M12
Adapter, CA Bayonet/M12 with 120 Ohm bus resistor Wire cross section: 5 x 0.34mm² Connectors: 5 pin M12, male, 7 pin bay, female
Connection Cable Control Box to Machine
Cable, 5 m Connection Control Box/Machine
Connector: 6 pin - Open end Cable length: 5 Meter
Power Cable for On Board Computer "MOBA Operand", 8m
Power Cable for On-board Computer "MOBA...
Power connection for On-board computer "MOBA Operand". Cable Length: 8 Meter Wire cross section: 4 x 0.75 mm² Connector: 7 pin "Fischer", female automobile power connector
Power Cable On-Board Computer
CAN Cable for On-board Computer "MOBA Operand",...
CAN connection cable for On-Board Computer "MOBA Operand"
Power Cable A Weather Station
Cable-set "Weather Station"
Cable set "Weather Station" Application: Pave-IR System Consisting of: 04-02-15353 Cable A, 0.5 Meter, 10 pin (weather station) / 7 pin "Binder", male 04-02-15352 Cable B, 5 Meters, 5 pin male, M12 / 7 pin "Binder", fem.
Cable Machine Bus
Cable "Machine Bus"
Cable "Machine Bus" for Vögele paver with WIFMS Cable length: 5 Meter
Connecting Cable Duo Level III
Connection Cables Duo Level III
Connection Cable to connect sensor with built-in indicator Connector: 7-pin, female, Open end
Connection Cables for Duo Level IV
Connection Cables for Duo Level IV
Connection Cable to connect sensor with built-in indicator (Duo Level IV) Connector: 7-pin, female, 7-pin, male
Coil Cable G-176 5-wires 3m
Coil Cable, Extension, 3 m Cable Extension
Connectors: CA 10 pin, female, CA 10 pin, male coupling
Coil Cable Controller Sensor
Coil Cable, Extension 6 m Connection...
Coil cable, exten. 6m connection from controller to sensor cable (CAN-interface)
Coil Cable
Coil Cable, Connection Junction/Sensor...
Coil cable, 6m connection from junction box to the sensor (CAN-interface) Cable length: 6 m (stretched) Connectors: CA 7-pin, bay. male, CA 7-pin, bay. female
Coil Cable MOBA-matic Controller
Coil Cable, 3m Connection Controller/Machine,...
For individual connection to machine Cable length: 3 Meter (stretched) Connectors: CA 12 pin bay. female (to conroller), Open end
Coil Power Cable Laser-matic
Coil Cable, 3m Connection Controller/Machine
Cable length: 3 Meter (stretched) Connectors: CA 12 pin bay. female (to conroller), CA 10 pole bay, female (to machine)
04-02-02561 Coil Cable 10m
Coil Cable, 3m Connection Controller/Machine...
Cable length: 3 Meter (stretched) Connectors: CA 12 pole bay. female (to conroller), CA 10 pole, female (to machine)
Coil Cable Terminal Resistors 6m
Coil Cable, 6 m Connection Controller/Sensor
Cable Type: CAN-interface incl. 2 x 120 Ohm CAN bus resistor Cable length: 6 Meter (stretched) Connectors: CA 7 pole bay. male, CA 7 pole bay. female
Coil Cable Extension 7m
Coil Cable, Extension 6m Connection...
Cable length: 6 Meter (stretched) Connectors: CA 7 pin, male, CA 7 pin, female coupling
Coil Cable Machine Controller
Coil Cable, 6m Connection Controller/Machine
Cable length: 6 Meter (stretched) Connectors: CA 7 pole, male, CA 7 pole 90°, female coupling
Coil Cable Controller G-176
Coil Cable, 6 m Connection Controller/Machine...
Cable length: 6 Meter, (stretched) Connectors: CA 7 pole 90° female open end
Coil Cable Controller G-176
Coil Cable, 6m Connection Controller/Machine...
Cable length: 6 Meter, (stretched) Connectors: CA 7 pin 90° female, CA 10 pin female
Coil Connecting Cable 3m
Coil Cable, 3 m Connection Controller/Machine...
Connectors: CA 7 pole 90° female, CA 10 pole female
04-02-20100 Ignition Cable
Ignition Cables
Ignition cable to connect a ignition electrode to Ignition Boxes IS-01 / IS-03.
Y-Cable Power Supply MCA-500
'Y-Cable, MCA-500', 3/1m
Connection for Power supply and CAN to operating panel "GDC-320". Cable length: 3 Meter (Power), 1 Meter (CAN) Connectors: 7 pin Binder, female (GDC-320), 5 pin Binder M12, female (CAN), Open end
Y-Cable_Junction IR-Spot
Y-Cable, CA-M12 Cable Junction
Cable length: 30 cm Connectors: 1 x CA 10 pole male couppling to 1 x CA 10 pole female, 1 x M12 5 pole female
Y-Cable Sonic-Ski 6m
Y-Coil Cable, 30cm/6m Connection Cable
Y-coil cable, 30 cm / 6 m connection between digital controller V3.26, machine and Sonic-Ski CAN and/or junction box. Cable length: 6 Meter (stretched) / 0,3 m incl. 2 x 120 Ohm CAN bus resistor Connectors: 10 pin male coupling...
Power Cable Y-Cable, M12
Power Cable Y-Cable, M12
Connectors: 8 pin female, 8 pin female, Open end
Y-Cable M12 Junction
Y-cable, M12
Cable junction Cable length: 30 cm Wire cross section: 5 x 0.34mm² Connectors: 1 x 5 pin M12, male, 2 x 5 pin M12, female
Cable M12, CAN, 5 m incl. 120 Ohm CAN-Bus-Resistor
Cable M12, CAN, 5 m incl. 120 Ohm CAN-Bus-Resistor
Cable length: 5 Meter Connectors: 5 pole M12, male, 5 pole M12, female
M12 Connection Cable
M12 Connection Cable
Connectors: 8 pole male / 8 pole female 90° Lenght: 7 Meter
Bus Termination Cable
Bus Termination Cable, M12 120 Ohm Resistor
Cable length: 30cm Wire cross section: 5 x 0,34mm² Connectors: 5-pin M12, male, 5-pin M12, female
Cable A Smart Antenna
Antenna Cable Set "SMART Antenna"
Cable set "Smart antenna" Application: Pave-IR System Consisting of: 04-02-15348 Cable A, 0.8 m, 14 pole(antenna) / 7 pole "Binder", male 04-02-15351 Cable B, 5 m, 5 pole male, M12 / 7 pole "Binder", fem.
Ignition Box IS-03
Ignition Box IS-03
Ignition Box for Automatic Gas Ignition and Flame/Temperature control at asphalt paver screed or ROAD MAINTENANCE MACHINES.
Iginition Box IS-01
Ignition Box IS-01
Ignition box for automatic Gas ignition and flame control on asphalt paver screeds or ROAD MAINTENANCE MACHINES
RS-232/USB Converter Cable USB-100
RS-232 to USB Converter Cable USB-100
Cable length: 2 Meter or 5 Meter
Viewed