Products from MOBA Mobile Automation AG
There is no better solution for the harsh everyday work of the construction industry. The specially developed technologies of MOBA convince under the roughest conditions - whether in wind, water, dust or vibration. They are not only tough, but above all: innovative.
No results were found for the filter!
GNSS RTK receiver LEANDER The GNSS Receiver LEANDER-3000 is a new generation GNSS RTK system. Indeed, LEANDER-3000 tracks multi-constellation GPS, GLONASS, Galileo, BeiDou etc. and can maximize the acquisition and tracking process with all-in-view GNSS satellite...
G-Slope LSTA Sensor, CAN, MGS-0150 Specially developed for use on a highly vibrating screed, the G-Slope sensor filters out interfering variables thanks to intelligent algorithms.
Pave Project Manager Pave Project Manager is the most sophisticated analysis and reporting tool for PAVE-IR data. It provides detailed information on thermal profiles, single spot temperature sensors, speed, paver stops, quality factor diagrams and much more...
GNSS Compass The GNSS compass provides important data, which is both essential for the orientation of the upper structure and the basis for adjusting the target slope. It completes the 2D system and optimizes it for working on sloped surfaces.
Magnet holder Kit Magnet holder Kit for for Brackets, IR Temperature sensor and Weather Station. It consists of magnet, Screw, nut M8 and washer.
Mobile Process Controller MPC-113 Thanks to the concept of modularity, also applied to the field of electronic control units, the MPC113 offers greater flexibility and a high level of safety, allowing the realization of a wide range of applications for the mobile...
Mobile Process Controllers - MPC-330 MOBA Mobile Process Controller MPC330 are designed and manufactured for use on heavy duty machines like mobile cranes and working lifters. MOBA MPCs distinguish themselves through their outstanding quality and are suitable for...
Multiple Ultrasonic Sensor Sonic-Ski Plus CAN/PWM The multiple ultra sonic sensor Sonic-Ski plus sensor is the first such device equipped with multiple ultrasonic oscillators. Five sensors determine the distance to the reference point, while a sixth is used for temperature compensation...
MOBA Modular Control Panel MCP Thanks to its modular construction, all components can be exchanged at any time in an uncomplicated manner. In addition to the hardware, the software has also been designed for long-term use. Such time- and cost-efficient upgrades not...
Controller, MPC-"3D-Pro" Integrated 2D and 3D controller in one single housing. It processes all measured values transmitted by the connected sensors at the machine.
Operating panel 3D-matic Visualisation of the 3D workflow and all important information. Transfer of saved measuring data via USB interface 7 inch transflective colour display with Intuitive operation
Signal Conditioner SC-102 metal Signal conditioner SC102 with LED indicators, CANopen interface with Bluetooth Module 2.0, IP67 ingress protection and a measurement rate of 100 Hz.
Printer Star DP8340 Voltage Range:12 V(DC) Interface: RS232 Housing Material: PVC Print Method: 7 pin shuttle impact dot matrix Paper Roll Dimensions: 115 mm Paper Thickness: 0.07 to 0.09 mm
Big Sonic Ski - Supplement Kit - replaces... The Bigski achieves maximum planarity during asphalt paving, making it unrivaled in its precision. With three sensors, long unevenness that occur in regular intervals of five to seven meters, can be detected. This increases the...
Big Sonic-Ski - Modular Kit 13m - replaces... Mechanic assembly for 3 grade sensors, with dismountable swing arm but without tow arm bracket.
MOBA Sonic III replaces Vögele 2013496, 2013495... Contact free ultrasonic measurement for optimal fleet management from asphalt in paver screed.
Material Control Sensor MOBA-Sonic IV To achieve a constant asphalt layer thickness, the ultrasonic sensor is the optimum solution for regulating the quantity of material in front of the screed.
Power Cable "Xsite PRO / Xsite PRO ADVANCED" Power Cable for Xsite PRO / Xsite PRO ADVANCED Operating Panel.
Power-switch Cable for MCC15 This Power Cable is needed when power to GNSS receiver is taken via the "CB2" Box.
Cables, Straight CAN connection 1m Cable with straight connectors at both ends. Connectors: 7-pin Bay. - 7-pol Bay.
Power Cable GS-506 Controller Power cable for power supply of controller/system "GS-506". Cable length: 6 Meter Connectors: 7 pin screw connection to open end
CF Industrial Card, 2GB CF industrial Card incl. image "MCC12 for "Xsite PRO/PRO ADVANCED" Data Space: 2GB
Adapterbox suitable for Vögele-Pavers Adapterbox suitable for Vögele-Pavers directs 2 controllers to one central machine connector. Cable length: 3 Meter Converts NPN to PNP (for Vögele paver) Connectors: 2 x CA 10 pole male (left/right), 1 x Harting 10 pole male (machine)
Y-Coil Cable, R-30cm/6m Connection Y-Coil cable, R-30 cm / 6 m connection between controller, machine and slope sensor Cable length: 6 Meter (stretched) / 0.3m incl. 1 x 120 Ohm CAN bus resistor Connectors: CA 10 pole male coupling (controller), CA 10 pole female...
Coil Cable, 3 m Connection Sonic/Machine, 6-pin... 6 pin Connection Coil cable to connect the Sensor Sonic-Ski with the Machine.
Coil Cable, Connection Sonic/Machine, 5-pin 5 pin Connection Coil cable to connect the Sensor Sonic-Ski with the Machine.
Coil Cable, 6m Connection Controller/Sensor Cable length: 6m (stretched) Connectors: CA 7pole, male, CA 7pole, female
USB Adapter Cable USB Adapter Cable to connect "MOBA-Drive" to a "Windows Office" PC Connectors: USB-A, 4-pin female
Adapter Cable, CA/M12 Adapter, CA Bayonet/M12 with 120 Ohm bus resistor Wire cross section: 5 x 0.34mm² Connectors: 5 pin M12, male, 7 pin bay, female
Power Cable for On-board Computer "MOBA... Power connection for On-board computer "MOBA Operand". Cable Length: 8 Meter Wire cross section: 4 x 0.75 mm² Connector: 7 pin "Fischer", female automobile power connector
CAN Cable for On-board Computer "MOBA Operand",... CAN connection cable for On-Board Computer "MOBA Operand"
Cable-set "Weather Station" Cable set "Weather Station" Application: Pave-IR System Consisting of: 04-02-15353 Cable A, 0.5 Meter, 10 pin (weather station) / 7 pin "Binder", male 04-02-15352 Cable B, 5 Meters, 5 pin male, M12 / 7 pin "Binder", fem.
Connection Cables Duo Level III Connection Cable to connect sensor with built-in indicator Connector: 7-pin, female, Open end
Connection Cables for Duo Level IV Connection Cable to connect sensor with built-in indicator (Duo Level IV) Connector: 7-pin, female, 7-pin, male
Coil Cable, Extension 6 m Connection... Coil cable, exten. 6m connection from controller to sensor cable (CAN-interface)
Coil Cable, Connection Junction/Sensor... Coil cable, 6m connection from junction box to the sensor (CAN-interface) Cable length: 6 m (stretched) Connectors: CA 7-pin, bay. male, CA 7-pin, bay. female
Coil Cable, 3m Connection Controller/Machine,... For individual connection to machine Cable length: 3 Meter (stretched) Connectors: CA 12 pin bay. female (to conroller), Open end
Coil Cable, 3m Connection Controller/Machine Cable length: 3 Meter (stretched) Connectors: CA 12 pin bay. female (to conroller), CA 10 pole bay, female (to machine)
Coil Cable, 3m Connection Controller/Machine... Cable length: 3 Meter (stretched) Connectors: CA 12 pole bay. female (to conroller), CA 10 pole, female (to machine)
Coil Cable, 6 m Connection Controller/Sensor Cable Type: CAN-interface incl. 2 x 120 Ohm CAN bus resistor Cable length: 6 Meter (stretched) Connectors: CA 7 pole bay. male, CA 7 pole bay. female
Coil Cable, Extension 6m Connection... Cable length: 6 Meter (stretched) Connectors: CA 7 pin, male, CA 7 pin, female coupling
Coil Cable, 6m Connection Controller/Machine Cable length: 6 Meter (stretched) Connectors: CA 7 pole, male, CA 7 pole 90°, female coupling
Coil Cable, 6 m Connection Controller/Machine... Cable length: 6 Meter, (stretched) Connectors: CA 7 pole 90° female open end
Coil Cable, 6m Connection Controller/Machine... Cable length: 6 Meter, (stretched) Connectors: CA 7 pin 90° female, CA 10 pin female
Coil Cable, 3 m Connection Controller/Machine... Connectors: CA 7 pole 90° female, CA 10 pole female
'Y-Cable, MCA-500', 3/1m Connection for Power supply and CAN to operating panel "GDC-320". Cable length: 3 Meter (Power), 1 Meter (CAN) Connectors: 7 pin Binder, female (GDC-320), 5 pin Binder M12, female (CAN), Open end
Y-Cable, CA-M12 Cable Junction Cable length: 30 cm Connectors: 1 x CA 10 pole male couppling to 1 x CA 10 pole female, 1 x M12 5 pole female
Y-Coil Cable, 30cm/6m Connection Cable Y-coil cable, 30 cm / 6 m connection between digital controller V3.26, machine and Sonic-Ski CAN and/or junction box. Cable length: 6 Meter (stretched) / 0,3 m incl. 2 x 120 Ohm CAN bus resistor Connectors: 10 pin male coupling...
Y-cable, M12 Cable junction Cable length: 30 cm Wire cross section: 5 x 0.34mm² Connectors: 1 x 5 pin M12, male, 2 x 5 pin M12, female
Cable M12, CAN, 5 m incl. 120 Ohm CAN-Bus-Resistor Cable length: 5 Meter Connectors: 5 pole M12, male, 5 pole M12, female
Bus Termination Cable, M12 120 Ohm Resistor Cable length: 30cm Wire cross section: 5 x 0,34mm² Connectors: 5-pin M12, male, 5-pin M12, female
Antenna Cable Set "SMART Antenna" Cable set "Smart antenna" Application: Pave-IR System Consisting of: 04-02-15348 Cable A, 0.8 m, 14 pole(antenna) / 7 pole "Binder", male 04-02-15351 Cable B, 5 m, 5 pole male, M12 / 7 pole "Binder", fem.
Big-Ski Junction Box replaces Vögele 2037420 Junction Box compatible with Vögele-Pavers connects 3 grade sensors with CAN interface for avaraging. Connector: 8 pin Baj. male (analog), 3 x 7 pin Baj. female (CAN) CAN interface: CAN ISO 11898 - 24 V 125 kBit/sec Output: Analog 0 to 8...
12 m Connector Coil Cable replaces Vögele... 12 Meter Connection Coil Cable from Junction Box/Sensor to leveling control unit Length: 12 Meter (streched) Connector: 8 pin Baj. female, 8 pin Baj. male
Big Sonic-Ski Case replaces Vögele 2271509 Transportation Case for Big Sonic-Ski Electronic Components.
12m CAN Connector Coil Cable replaces Vögele... 12m CAN Connector Coil Cable replaces Vögele 2037422 Length: 12 Meter (stretched) Connectors: 7 pin Baj. female (CAN), 7 pin Baj. male (CAN)
Cross Slope Sensor MGS-0600 X-axis, +/- 60° Gyro-Sensor Interface: CAN ISO 11898-24 V 125 kbit/s 40 Hz Connector: 7 pin bayonet type connection Weight: 1.3 kg Ingress Protection: IP67
Material Control Sensor MOBA-Sonic III To achieve a constant asphalt layer thickness, the ultrasonic sensor is the optimum solution for regulating the quantity of material in front of the screed.
Manual Mast TM-900 Mast lock with clamping screw Shock absorbing mounting suspension Printed-on scale: 0 – 100 cm Extension length: 900 mm Resolution: 1 mm Material mast tube: Anodized aluminium Weight: 2,8 kg
LED Built-in Indicator Duo-Level-Display III Max. resolution (per LED): 0.2° Current consumption: Weight: approx. 300 g Ingress Protection: IP66 Fitting: Attachment screw
LED Built-on Indicator Duo-Level Indicator II Rugged designed LED build on indicator for bore ram applications or other machine operatings.
LED Built-on Indicator Duo-Level Indicator IV Current consumption: Connectors: 1x 7 pin male connector, 1x 2 pin male connector Weight: approx. 1 kg Ingress Protection: IP65
CAN I/O Module Box CAN I/O Module Box with CAN, CANopen DS 401, Interface Device Profile for Generic I -O, default Baudrate 250 KBaud. CE according to EMC-guideline 89/336/EWG
Signal Conditioner SC-102 Signal conditioner SC102 with LED indicators, CANopen interface with Bluetooth Module 2.0, IP67 ingress protection and a measurement rate of 100 Hz.
LCD Dual Slope Indicator Rugged designed LCD slope indicator for bore ram applications or other machine operatings. Can be operate with gloves.
Slope Sensor X/Y-Axis, Duo-Level-Encoder IV Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Printer MRP-580 Current consumption: 2 A Interface: RS232 Connector: 8 pin male connector Weight with mount: 1.3 kg Ingress protection: IP65
Slope Sensor X/Y-Axis, Duo-Level-Encoder III ± 10° Measuring range: ± 10° Output signal: 4-20 mA 600 Ohm Current consumption: Shock resistance: 15 g, 15 ms Connector: 5 pin male connector Weight: approx. 1 kg Ingress Protection: IP67
Slope Sensor X/Y-Axis, Duo-Level-Encoder III ± 5° Measuring range: ± 5° Output signal: 2x 4 ...20 mA (max.600 Ohm) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: 1 kg Ingress Protection: IP67
Slope Sensor X-Axis, Duo-Level-Encoder II Measuring range: ± 5° Output signal: 2 x 4-20 mA (Last max. 500 π) Current consumption: Shock resistance: 15 g, 15 ms Connector: 7 pin male connector Weight: approx. 1.8 kg Ingress Protection: IP67
Junction Box LTS Housing material: Aluminium Load Cell Connections: 7x 5 pin female connector Weight: approx. 500 g Ingress Protection: IP67
Junction Box 5P LTS Housing material: Aluminium Load Cell Connections: 5x 5 pin female connector Weight: approx. 500 g Ingress Protection: IP67
Multi-switch Operating Unit MSU-100 Multi Switch unit for the MOBA 2D machine control system GS506 of grader dozer or blade.
Mobile Process Amplifier MPA-100 The MPA100 is an integrated digital controller with LCD based HMI for easy operation severeal sensor signals can be processed by the controller. The controller has fault diagnosis capability for easy troubleshooting.
Slope Sensor CAN, X/Y-Axis ± 60° Measuring range: X/Y-Axis, ± 60° Connector: 7 pin male connector, bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67
Mobile Signal Controller MSC-113 Inputs / Outputs: 2 x 4 (8) of Inputs: digital high side or analogue 0-25 mA, 0-32 Vdc 2 x 2 (4) of Inputs: digital high side or analogue 0-25 mA, 0-5.5 Vdc, 0-32 Vdc with pull up to read a PTC sensor 2 x 4 (8) of Digital/PWM high side...
Handheld Transponder Reader BTR-2 Handheld RFID Transponder Reader for FDX, HDX, and LF Transponder. Rugged designed for logistics and waste management market.
RFID Tooth Antenna Material: PA 6 Connector: 1 Meter cable 4 pol. with Cannon connector for Zoeller antenna preparation
RFID Antenna MSTX Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 136 mm length x 25 mm width x 50 mm height Weight: 300 g
RFID Antenna STL1 Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 200 mm length x 20 mm width x 20 mm height Weight: 180 g
RFID Antenna OHZ Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 80 mm length x 40 mm width x 40 mm height Weight: 610 g
RFID Antenna DBR Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 70 mm length x 40 mm width x 40 mm height Weight: 550 g
RFID Antenna VDK Material: PA 6 Connector: 1 Meter Cable 4 pol. with Cannon connector Dimension: 230 mm length x 25 mm width x 25 mm height Weight: 260 g
GPS Antenna MNL-604P GPS receiver with connector Operand, M16 for mounting on the machine's roof. Interfaces: RS232, Tx, Rx, GND Protocols: NMEA 0183, GGA, GSA, GSV, RMC (optional VTG, GLL) Ingress protection: IP67 (waterproof)
Analog Slope Sensor Measuring range: 1-Axis, ± 10% Connection: 6 pin male plug, screwed connection Ingress Protection: IP67 Weight: 1.2 kg
Slope Sensor CANopen, X/Y-Axis ± 60° Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin male connector M12, 1x 5 pin female connector M12 Interface: CAN ISO 11898 – 24 V 250 kBit/sec Ingress Protection: IP67 Weight: 700 g
Transponder 134,2 kHz Frequency: 134.2 kHz Modulation: FSK, HDX Programmability: Read Only Conformity: DIN EN 30745, EN 14803
Transponder Type Puck 1.1 For Metal Containers Shock: 300 g, 2 Axes, IEC 68-2-27, Test Ea Vibration: 15 g from 10 - 2000 Hz, 2 Axes, IEC 68-2-6, Test Fc Programmability: Read Only Typical reading distance: approx. 50 cm Typical reading time: 100 ms Conformity:...
Transponder, Puck-MSTS, R/O, BDE Shock: 300 g, 2 Axes, IEC 68-2-27, Test Ea Vibration: 15 g from 10 - 2000 Hz, 2 Axes, IEC 68-2-6, Test Fc Programmability: Read Only Typical reading distance: ca. 30 cm Typical reading time: 100 ms Weight: 7g Conformity: DIN EN 30745, EN...
UHF-Transponder InLine Ultra Slim Work-/Operating frequency: 865-956 MHz (EU, US, JP) Data space: 128 bit EPC + 96 bit TID + 512 bit user memory Reading distance: up to 4 Meters Housing material: PC/ABS (high shock resistance) Fixing hole: Ø 5.2 mm Standards/Regulations:...
HP-Transponder for Containers Programmability: Read Only Typical reading distance: ca. 80 cm Typical reading time: 100 ms Vibration: 10 g from 10 - 2000 Hz, 2 Axes, IEC 68-2-6, Test Fc Weight: 45 g Ingress Protection: IP67
Analog Rotary Sensor Contactless ± 30° Measuring range: ± 30° Connector: 6 pin plug; screwed connection Ingress Protection: IP67 Weight: approx. 900 g
Analog Rotary Sensor Contactless ± 156° Measuring range: ± 156° Connection: 6 pin plug; screwed connection Ingress Protection: IP67 Weight: 750 g
Slope Sensor CAN, X/Y-Axis ±60° Measuring range: X/Y-Axis, ± 60° Connector: 7 pin bayonet type connection Interface: CAN ISO 11898 – 24 V 125 kBits/sec Ingress Protection: IP67 Weight: 700 g
Slope Sensor MSSR-322, CANopen X/Y-Axis ± 60° Measuring range: X/Y-Axis, ± 60° Connector: 1x 5 pin female socket, Binder M12, 1x male socket, Binder M12 Interface: CANopen CiA DS301 Ingress Protection: IP67 Weight: 300 g
Slope Sensor MSSR-330, CANopen X-Axis ± 180° The slope sensor works with a high-precision, micro-mechanical sensor element serving to record the angle of attack of the wheel loader truck lift frame.
Power Connection Box Connectors: 20 x 6,3 mm flat blade connector Current consumption (rated value): 80 mA Ingress Protection: IP65
Controller GS-506, CAN-Valves Outputs: 4x ON/OFF or PWM (1 kHz), NPN or PNP, max. 3 A, or 4x Danfoss Interfaces: 3x CAN ISO 11898 – 24 V 125 kBits/sec Connectors: 1x 7 pin male screwed connection, 1x 7 pin female bayonet connection, 1x 10 pin female screwed...
Controller MLC-508 Outputs: 7x current controlled valve outputs, max. 3 A, Interfaces: 3x CAN ISO 11898 – 24 V 125 kBits/sec Connectors: 2x 7 pin male screwed connection, 1x 19 pin screwed connection, 1x 10 pin female screwed connection Ingress Protection:...
Handset SmartAmp Voltage range: 6 V DC Current consumption: 12 mA Ingress Protection: IP54 Connector: 5 pin female connector; screwed connection Length connecting cable: 1 Meter coiled Weight: 720 g
Multiple Ultrasonic Sensor Sonic-Ski PWM Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski® PWM sensor is the first such...
Multiple Ultrasonic Sensor Sonic-Ski Plus... Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski ® plus sensor is the first such...
Big Sonic-Ski Modular Kit This kit exists of an up to 13 m long mechanic assembly with dismountable swing arms and a respective electronic kit of up to 4 ultrasonic sensors. 4 sensors achieve the most precise and even results, in particular, with respect to road...
Junction Box for Big Sonic-Ski with 4 Sensors Junction Box to connects 4 grade sensors with CAN interface for averaging. It operates only with Operating Panel MOBA-matic II "MMC-2000" 04-25-10500-A02. Interfaces: CAN ISO 11898 – 24 V – 125 kBit/sec Connectors: 1x CA 7 pole bay....
Junction Box for Big Sonic-Ski with 3 Sensors Junction Box to connects 3 grade sensors with CAN interface for averaging. Interfaces: CAN ISO 11898 – 24 V – 125 kBit/sec Connectors: 1x CA 7 pole bay. female (to controller), 3x CA 7 pole bay. male (to sensors) Weight: approx. 1.2 Kg...
GNSS Antenna Assesses the exact position of the machine within a terrain via GNSS coordinates, thereby reducing manual surveying to up to 90% and optimizing usability. The antenna is easy to handle for installation as well as servicing. Single and...
Grade Controller G-176 M Kit Mechanical Grade Control 2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy to operate Robust quality Stringline- or ground sensing Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are...
Combi Grade Controller G-176 MS Level control with ultrasonic sensor and synchro-transmitter Mechanical and ultrasonic sensing with one unit Allows flexible sensing Set-point adjustable via remote control Ground sensing without additional mechanical components...
Grade Controller G-176 Plus Kit 2 adjustable valve outputs: ON/OFF, PNP o. NPN, 10…190 ms min. puls Easy to operate Mechanical sensing Wear-resistant sensor Remote handset (optional) Digital sensor and module Less broken operating panel cause of flat operating surface...
Grade Controller G-176 Sonic Plus Kit 2 adjustable valve outputs: ON/OFF, PNP o. NPN, 10…190 ms min. puls Easy to operate Contactless sensing 3 Ultrasonic Transducers Wear-resistant sensor High accuracy by multi-sonic technology Digital sensor and module Less broken...
Multiple Ultrasonic Sensor Sonic-Ski Plus,... Contact-free sensing from the ground, string line or curb for the grade control. That means maximum flexibility by using different references, no mechanical wear, no soiling of the sensor. The Sonic-Ski ® Plus sensor is the first such...
Slope Controller S-276 M Kit with LCD Handset 2 valve outputs: ON/OFF, NPN, 40 ms min. puls Easy handling with LCD Handset Robust quality Protected against wrong polarity and voltage peaks The control modules for the Grade and Slope units are interchangeable S-276 M Kit consisting...
Slope Controller S-276 Plus Kit 2 valve outputs: ON/OFF, PNP or NPN, 10…190 ms min. puls Vibration protected sensor Digital sensor, handset and module Flat operating surface Easy to operate High accuracy Reliable quality Control modules for grade and slope controllers...
Filling Level Sensor FLS-2 The FLS2 wireless level sensor is designed to record and monitor the filling level of waste containers. The sensor is installed on the lid of a container – no matter whether it is an underground, semi-underground or standard container.
Ignition Box IS-03 Ignition Box for Automatic Gas Ignition and Flame/Temperature control at asphalt paver screed or ROAD MAINTENANCE MACHINES.
Ignition Box IS-01 Ignition box for automatic Gas ignition and flame control on asphalt paver screeds or ROAD MAINTENANCE MACHINES
Graphic Display GDC-320 Rugged designed graphic display for different machine operatings. Can be operate with gloves. Customize your application with CODESYS.
Operating Units Operating units for MOBA MWS onboard scale system - mounted directly outside from the lifter garbage truck.
On-Board Computer Operand PAVE-IR PAVE IR operating panel which simply and clearly creates a thermal profile of the road – and that in real-time!
On-Board Computer Operand MCA Through the optimal interaction between acceleration sensor, temperature sensor and GNSS antenna the MCA achieves compaction results at the highest level. With our high-end operand panel, the entire process is also visualized, thereby...
Transponder Reader Ident Control IDC-30 CAN Mobile and stationary identification of HDX transponders (IDC-30 CAN and IDC-30-422) or UHF transponders (IDC-30 CAN UHF). Ingress protection: IP66 Certification: EN 300330, EN 301489, EN 50357
Mobile Signal Conditioner MTSC-202 Conversion for distance / speed / position Interface: CANopen / 250 k Connectors: 5 pole Binder M12
Mobile Signal Conditioner MTSC-203 Conversion from digital signals to CAN Small, robust design Automatic or manual processing CAN interface Connectors: 5 pole Binder M12
LED Display XD2 LED display XD2 for effektive bucket control at excavation control projects. Get visual LED status from the bucket position.
Operating Panel Dual Laser-matic Ensures intuitive operation with ergonomic push-buttons and LEDs. Parameter settings can be created individually and the laser search can be started at the touch of a button.
SIM BOXES With the MOBA SIMBox, MOBA offers developers the possibility of quickly implementing solutions based on MOBA controllers. Furthermore, it is a programmable simulation box, which can be configured by a specially designed software tool. In...
Power Mast ETM-900 The Power Mast ETM-900 increases the laser receiver’s reception range considerably, since the sensor can follow up the entire adjustment range of the lift cylinder. As another advantage the user can position the laser receiver very...
Pressure Transmitters Measure hydraulic pressure in front of and behind the hydraulic cylinder Sensor interfaces: PWM/analog Robust designed
Acceleration Sensors Detects the tamper's vibration Improves the machine's driving signal Robust design CAN-Interfaces
Controller MCC15 Processes all incoming position data Compares the position of the bucket with the design data
Display Modules HMI display module with high resolution and CAN or CANopen interface - customer specific foil design is possible. Made in Germany.
Triple Housing Units Flexible combination of HMI modules with the MOBA trible housing unit. Small production quanitites are possible directly in Germany.
Single Housing Units rugged designed MOBA single housing for HMI modules like joystick display or keypad - modular construction design and service friendly concept. Optimal product for system application engineers and machine manufacturer. Made in Germany.
Keypad Modules HMI Keypad module which can be produce in small quantities directly in Germany - the foil could be designed in your company CI.
Joystick Modules Robust designed HMI Joystick module with special potting combound protects electronics- small production quantities are possible directly in Germany.
On-Board Computer MOBA Operand Type D High-tech operating computer with high-speed processors, high-resolution 7" display and the latest display software. Well equipped for optimal garbage collecting tours.
GNSS / SBAS Smart Antenna Assesses the exact position of the machine within a terrain via GNSS coordinates, thereby reducing manual surveying to up to 90% and optimizing usability. The antenna is easy to handle for installation as well as servicing. High...
Digi Rotary Sensor Can be used under all climatic conditions Operates in stringline and ground sensing modes Measuring range: ± 30° Measuring accuracy of over ± 0.1° Operating temperature range: -10 ...+70°C Ingress protection: IP67 CAN Interface
Operating Panel Laser-matic High-precision laser land levelling work is a vital part of today’s construction site requirements. A flat, even surface determines the quality of the overall project. The MOBA Laser matic and Dual Laser matic leveling systems solve this...
Operating Panel MOBA-matic / MMC-2000 The easy and intuitive operation, as well as the high reliability are further aspects that have made our MOBA matic so successful - there' s a reason why so many OEMs already trust in our system factory-made.
Operating Panel CP-100 Proven weight indicator display and control panel for onboard truck scales. Rugged designed with internal data storage OEM product for machine manufacturers.
Graphic Display GDC-800 Display: 800 x 480 TFT 7“ TFT (Brightness continuously adjustable) 600 cd/m² brightness / sunlight readable Housing: Plastic PA6 Ingress Protection: IP65
Operating Panel GS-506 Whether for crawler, grader, kilver or levelling blade, the 2D levelling system gives your machine a technology upgrade to eclipse all others. The system for height and inclination control regulates the coulter of your machine fully...
Operating Panel Xsite PRO With the Xsite PRO 3D system you are always well equipped for all requirements of a construction site. Whether simple work or complex construction projects, MOBA excavator controls provide a perfect interaction between all components to...
Operating Panel Xsite EASY The robust Xsite EASY operating panel ideally equips you for the daily construction routine. Harsh weather conditions, rough terrain or poor visibility do not pose a challenge any more. The excavation system allows you to maintain the...
Slope Sensors - MOBA-matic The MOBA Slope Sensor has to be mounted on the screed to detect the current slope of the working tool. The unit offers the accuracy required even if operated with heavy vibration (compaction) and high temperature environments.
5-Channel Laser Receivers CLS 3000 The CLS3000 machine receiver provides you with accurate height information for all optical machine control applications, with a reception range of 360°. The Laser Receiver is mounted to the mast with brackets. This guarantees a quick...
Proportional Laser Receivers LS 3000 The LS3000 machine receiver provides you with accurate height information for all optical machine control applications, with a reception range of 360°. The Laser Receiver is mounted to the mast with brackets. This guarantees a quick...
Laser Receiver EL3 The EL3 excavator receiver provides you with accurate height data for all optical machine control applications, with a reception range of 240°. The laser receiver is attached to the excavator stick by using extra strong magnets or...
Communication Gateways CG-1 CAN-Gateway Keyboard with 16 keys, RESET function Display: 128x64 monochrome Compact and rugged design GPRS module GPS mouse Bluetooth (optional) Micro SD card CE according to EMC guideline
Mobile Process Controllers - MPC MOBA Mobile Process Controllers (MPC) are designed and manufactured for use on heavy duty machines. MOBA MPCs distinguish themselves through their outstanding quality and are suitable for application in different markets.
Cross Slope Sensor Measuring range: X-axis ±60° Interface: CAN ISO 11898 – 24 V – 125 kBit/sec Dynamic detection of the coulter inclination, longitudinal machine inclination and coulter rotation Operates with a dynamic liquid sensor
IR Temperature Sensor IRspot Cable length: 1 Meter Interface: I²C (supposed to work with MTSC-201) Connector: 5 pole M12, male Ingress protection: IP65
Slope Sensor G-1 Measuring axis: X, Y, Z (three-axis) Resolution: 0.05° Measuring range: 360° per axis IP classification IP67
MRW Load Cells Highly precise load control of the aerial work platform basket or mobile cranes. The weighing cells provide high accuracy caused by compensating the lever arm effect and is able to compensate the temperature effect on the zero point,...
Slope Sensor X Material Operating Panel Multiple Operating Panel Big Sonic-Ski Antenna Digi Rotary Display Modules Big-Ski MRS Rotation Single Housing Material Handheld Wire Rope Infrared Remote RFID Antenna Pave Project Operating Panel Multiple Controller Cross Slope Operating Panel On-Board Transponder 134 SIM BOXES Acceleration Sonic Ski MRW Load Cells Laser Receiver Mobile Signal Operating Panel 5-Channel Laser LED Built-on Bus Termination Mobile Process MOBA Sonic III MSS Slope Slope Sensors - Ignition Box G-Slope LSTA Grade Mobile Process Proportional Power Mast Controller
Viewed